ATF Lines, Removing and Installing

ATF lines, removing and installing





1. Hex bolt, 20 Nm
- Before tightening bolt, push in pipe onto stop by hand
2. ATF pipe
- To cooler
- Note colored markings -arrow
3. ATF pipe
- From cooler
- Note colored markings -arrow
4. O-ring
- Insert with
- ATF
- Always replace
5. Hex bolt, 65 Nm
6. Hex bolt, 10 Nm
7. Bracket
8. Union nut, 30 Nm
9. ATF pipe
- To cooler
- Note colored markings -arrow
10. ATF pipe
- From cooler
- Note colored markings -arrow
11. Clamp
12. Hex bolt, 10 Nm
13. ATF pipe
- To cooler
- Note colored markings -arrow
14. ATF pipe
- From cooler
- Note colored markings -arrow
15. Hex bolt, 5 Nm
- Before tightening bolt, push in pipe onto stop by hand