Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2001 >> Passat GLS Wagon (3B6) V6-2.8L (ATQ) >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Testing - 5 Speed Automatic 01V >> Scan Tool Connecting and Initial Checks >> Scan Tool VAS 5051, Connecting

Scan Tool VAS 5051, Connecting




Vehicle Diagnosis, Testing and Information System VAS 5051, Connecting and Selecting Engine Electronics Control Module

All functions which could previously be performed with VAG 1551/1552 can also be performed with the new tester VAS 5051 in the operating mode vehicle On Board Diagnostic (OBD):

Special tools and equipment







- VAS 5051 Diagnosis, Testing and Information System

Work sequence
- With ignition switched off, connect tester VAS 5051 to Data Link Connector (DLC) using diagnosis cable VAS 5051/1 or VAS 5051/3.


NOTE:
- In the functions 04 - Basic setting/08 - Read data block, the display zones will be listed from top to bottom.
- If the display does not indicate as described in the work sequence:
pro multis · About Operation CHARM