Automatic Transmission Control Module (TCM) -J217

automatic transmission control module (TCM) -J217





Fig. 4 Location of automatic transmission control module (TCM) -J217-
The control module is located in the left footwell, on the "A" pillar.
If the engine or transmission control module is replaced, the system must be reset.





Fig. 5 Removing and installing automatic transmission control module (TCM) -217
^ Remove relay plate cover and unhook relay plate.

^ Switch ignition off, release multi-pin connector in direction of arrow and pull out of control module.
^ Remove control module.
Installation is performed in the reverse order.