Reading

Read Measuring Value Block

Special tools and equipment

- V.A.G 1551 Scan Tool (ST) with V.A.G 1551/3 Adapter

- Connect Scan Toot (ST), Initiate On Board Diagnostic (OBD).

Refer to "Scan Tool(ST), Connecting" Scan Tool Connecting and Initial Checks

The measuring value block is divided into 3 display group numbers. Assignment of the individual display fields can be found in the display group overview. Evaluating Measured Value Blocks

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to initiate "Read measuring value block", function 08.

Indicated on display:


Rapid data transfer Q
08 Read measuring value block


- Press -Q- button to confirm input.

Indicated on display:


Read measuring value block HELP
Enter display group number XX


NOTE: Display group number 001 is used as an example to indicate procedure.


- Press buttons -0-, -0- and -1-to select "Display group number 1". Press -Q- button to confirm input.

Indicated on display: (1...4 = display fields)


Read measuring value block 1 ->
1 2 3 4







- After -C- button is pressed, the following appears.

Indicated on display:


Read measuring value block HELP
Enter display group number XXX


- Now the desired display group number can be entered.