Fuse/Relay Panel, Removing and Installing

Fuse/relay Panel, Removing And Installing


NOTE: Fuse/relay panel is located behind cover on driver's side storage.







- Turn locking knob -arrow- counter-clockwise. open cover, and unhook from instrument panel trim.
- Release retainers on right and lower left of cover for multi-fuse adapter -3- and pull out of retainers into passenger compartment.


NOTE: To remove fuse/relay panel -2- it usually is not necessary to remove reinforcement -1-, however it improves access.







- Remove reinforcement -1-.







- Release securing clips -1- from pins -2- on left and right of fuse/relay panel and swing upwards.
- Push left retainer outwards until rotary catch has been pulled out of hole in retaining plate.
- Unhook fuse/relay panel from retainers -3-.

When installing, the fuse/relay panel rotating catch must engage in the retainer. The securing clips must be located on the pins.