Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2002 >> Eurovan GLS V6-2.8L (AXK) >> Repair and Diagnosis >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Multi-Pin Connectors of Fuse/Relay Panel, Remove/Install
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Multi-Pin Connectors of Fuse/Relay Panel, Remove/Install




Multi-pin Connectors Of Fuse/relay Panel, Removing And Installing

Removing







- Pull retaining slide -1- on rear of fuse/relay panel out of housing -arrow- as far as possible (about 5 mm).







- Depress retaining lug on multi-pin connector -arrow- and pull out of socket.

Installing


NOTE: Insert connector so locking pin -2- faces locking slide -1-.







- Push connector into socket as far as stop with locking pin -2- located in recess -4- until retaining tab -3- engages.
- Push locking slide -1- against stop -arrow-; only possible when all multi-pin connectors are pushed in until the retaining tabs -3- are engaged.


pro multis · About Operation CHARM