Compressor and Bracket, Assembly

Compressor And Bracket, Assembly

Compressor bracket, removing and installing

Required:
- Torque wrench 5 - 50 Nm (44 in lb - 40 ft lb)


NOTE: Compressor bracket and related parts can be removed and installed without discharging A/C refrigerant system.







1 - Generator (GEN) compressor and power steering pump bracket
- Removing:
- Remove Generator (GEN)
- Remove compressor
- Remove power steering Pump
- Installing:
- First install guide bolts -3-
2 - Washer
- 8.4 x 16 x 1.6
3 - Guide bolt (2x)
- M8 x 60
- 25 Nm (18 ft lb)
4 - Socket head bolt
- M8 x 60
- 25 Nm (18 ft lb)
5 - Refrigerant hoses
6 - Compressor
- Removing:
- Loosen bolts -8-, knock-back clamping sleeves on compressor, then remove bolts completely.
7 - Ribbed drive belt
8 - Hex bolt
- M10 x 112
- 45 Nm (33 ft lb)
9 - Socket head combination bolt
- M8 x 25
- 25 Nm (18 ft lb)