Side and Rear Window, Assembly Overview
Side and rear window, assembly overview
1 - Side/rear window
2 - PUR adhesive sealant
- Bead cross section Width = 8 mm (1/3 in.) Height = 13 mm (1/2 in.)
3 - Window molding
- Removing
- Remove lower window flange with fabric reinforced tape.
- cut window molding and pull Off window with needle nose pliers.
- Mount first before applying adhesive bead
- See item 4 for repair profile. If glass is replaced use production seal
4 - Molding (Repair profile)
- Beginning 10.95
- Size to fit
- To be used during painting, without removing glass