Windshield Wiper System, Assembly
Windshield Wiper System, Assembly
CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.
1 - Wiper blade
2 - Wiper arm
3 - Cap
4 - Hex nut M8
- 19 Nm (14 ft. lb.)
5 - Washer
6 - Hex bolt M6
- 5 Nm (44 in. lb.)
7 - Rubber grommet
8 - Spacer
9 - Hex nut M8
- 25 Nm (18 ft. lb.)
10 - Linkage
11 - Hex nut M8
- Self-locking
12 - Crank
13 - Wiper motor
- Remove wiper frame first
14 - Wiper shaft
15 - Spring washer
16 - Wiper frame
17 - O-ring
18 - Spacer washer
19 - Washer
20 - Snap ring
21 - Plastic washer
22 - Spacer ring
23 - Hex nut M16
- 10 Nm