Instrument Cluster and ECM, Adaptation (Function 10) Notes

Replacement Of Instrument Cluster And Engine Control Module (ECM), Adaptation (function 10)

If all components are to be replaced, adapt all control modules and use new key set.

Appropriate control modules must be obtained from the parts department based on the Vehicle Identification Number (VIN) and engine code.

Appropriate ignition keys must be obtained from the parts department based on the key number.

- Install new components.
- Before adapting components, the VIN must be entered into the control module for the immobilizer. This is only possible with the VAS 5051 tester.
- Adapt Engine Control Module (ECM).
- Adapt all ignition keys.