Section B

Section B - Check ABS Control Module Supplier Code

^ Drive vehicle into hoist area

^ Raise vehicle on hoist





Remove small grommet -large arrow- for the ABS wheel speed sensor wire in the left front wheel housing

Note:
Tire and wheel removal is not necessary

Read supplier code -small arrow- (circled for illustration purposes only) of the ABS control module through the opening

Note:
The label showing supplier code is upside down in vehicle

^ If the ABS control module has part number 1C0 907 379 C and has supplier code 0321.3, the ABS control module must be replaced. Reinstall rubber grommet and proceed to Section C

^ If the ABS control module has part number 1C0 907 379 C and does not have supplier code 0321.3, no further work is required. Reinstall rubber grommet and lower vehicle on hoist