Section D

Section D - Code ABS Control Module

^ Connect VAS 5051 to data link connector located under dash left of steering column

^ Turn ignition switch to "ON" position

^ On the VAS 5051 Start-Up screen, press "Vehicle Self Diagnosis" button

^ Select "03 - Brake Electronics"

^ Select "07 - Code control unit"





<-- Enter relevant code number for this vehicle when installing ABS control module 1C0 907 375 J

^ Press the "Q" button to confirm

Note:
On the display, in the upper right corner, the control module part number and coding are displayed

^ Press <-- button

^ Select "06 - End output"

^ Disconnect VAS 5051 from vehicle

^ Recode radio and reset radio preset stations

^ Reset clock

^ Where applicable, reset power window pinch protection

^ Turn ignition to "OFF" position

^ Proceed to Section E