Symbols for Working Procedures

Symbols for Working Procedures





Grind

- In order to strip off material from a welding seam using a rod grinder.

• Welding seams should be ground so that the strength of the outer panels is reduced by a minimum or not at all.

•

•

Offset





- For overlap welding.

Punch

- For subsequent SG plug welding.

Drill

- For subsequent SG plug welding or spot welding (original joint).

Grind

• Use brush (VAS 5182) to remove paint in areas where access is difficult (e.g. inner roof frame).

Cavity conservation





Bond





Seal