Automatic Transmission/Transaxle

4 Speed Automatic 01M

Main pressure specifications at idle








If there are deviations from the prescribed values, the following could be the cause:

- Switch engine off.





Solenoid valve connector
- Press fuse together and pull off connector.
- Start engine.

Main pressure specifications at 2000 rpm





If possible, the main pressure test should be performed on a rolling road.





If there are deviations from the prescribed values:
- After test is complete, disconnect pressure tester V.A.G 1702.
- Install new bolt for main pressure port and tighten to 15 Nm.
- Fit solenoid valve connector.
- Once connector has been fitted, check and erase DTC memory.
- If necessary, install sound insulation.