Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2003 >> Jetta Sedan (9M2) L4-1.8L Turbo (AWP) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Monitors, Trips, Drive Cycles and Readiness Codes >> Readiness Code Reading >> With Generic Scan Tool
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

With Generic Scan Tool



Read Readiness Code

Requirements
- must not be any DTCs stored in DTC memory, Diagnostic mode 3: Check DTC memory. Diagnostic Mode 3: Check DTC Memory

- Coolant temperature must be at least 80 degrees C, Diagnostic mode 1: Check measured values; PID 5, Coolant temperature. Diagnostic Mode 1: Check Measured Values

Work procedure
- Connect diagnostic tester. Diagnostic Tester, Connecting
- Start engine and let run at idle.
- Under address word 33, select "Diagnostic mode 1: Check measured values."
- Select desired measuring value "PID 01".
- Observe right 8-digit number block:

If all diagnoses have run through successfully, the 8-digit number block
Specified value: 00000000 must be displayed.

Evaluation PID 01: System status-information (right 8-digit number block:)







If a 1 is displayed instead of a 0 in the 8-digit number block:
- Generate readiness code. Readiness Code Generating (VW Drive Cycle)
pro multis · About Operation CHARM