Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2003 >> Passat Sedan (3B3) V6-2.8L (ATQ) >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Compression Check >> Testing and Inspection >> Compression Pressures, Checking
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compression Pressures, Checking



Compression Pressures, Checking

Special tools and equipment

- 3122 B Spark plug spanner





- VAG 1331 Torque wrench (5-50 Nm)
- VAG 1763 Compression tester

Test conditions
- Engine oil temperature must be at least 30 C

Work sequence
- Remove engine cover.
- Disconnect spark plug connector and remove spark plugs with spark plug spanner 3122B.





- Pull 5 pin connector -1- off ignition coil final stage -2-.
- Remove fuse 28 (fuel pump) or pull connectors off all injectors.
- Have a second technician fully depress accelerator pedal.
- Check compression with compression tester VAG1381/VAG1763, operating starter until tester shows no further pressure increase.

Note: See relevant test unit operating instructions for instructions on how to use test unit.

Compression pressure:
- New: 9 - 14 bar
- Wear limit: 7.5 bar
Permissible difference between all cylinders: 3 bar
pro multis · About Operation CHARM