Selector Cables, Assembly Overview

Selector cables, assembly overview

Note: Lubricate all mountings and sliding surfaces with Polyurea grease Part No. G 000 450 02.

1 - Gear selector cable
2 - Gate selector cable
3 - Circlip
4 - Circlip
^ Do not damage cables when removing
5 - Shift housing
6 - Hex bolt, 25 Nm
^ For support bracket
7 - Support bracket
8 - Bushing
^ Support bracket mounting to transmission
9 - Distance piece
10 - Cable locking mechanism
^ Secured with securing clip
11 - Relay lever
12 - Bushing
13 - Circlip
14 - Shoe
15 - Transmission selector lever
16 - Hex nut, 20 Nm
^ Self-locking
^ Always replace
17 - Cable locking mechanism





Installation position of transmission selector lever/relay lever
1 - Gear selector lever
With balance weight
2 - Relay lever
Locates in guide rail of gear selector lever via shoe (arrow)