Toe on Front Axle, Adjusting

Toe on front axle, adjusting
Adjustment of the toe angle is carried out without the adapters and with vehicle on hard standing.





^ Loosen lock nut - B -.
^ Adjust toe on left and right-hand wheels at hex - A -.

After turning tie rods, ensure that the boots are not twisted.

Twisted boots wear out quickly.
^ Tighten lock nut - B - or and check toe in again.

After tightening lock nut - B - it is possible that the value deviates slightly.

If the measured toe nevertheless lies within the tolerance, the adjustment is correct.