Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2004 >> Passat Sedan (3B3) L4-1.8L Turbo (AWM) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Lighting and Horns >> Headlamp Alignment Control Module >> Service and Repair >> Control Module For Headlight Beam Adjusting -J431-, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module For Headlight Beam Adjusting -J431-, Removing and Installing



Control Module For Headlight Beam Adjusting -J431-, Removing And Installing

Control module is mounted in left luggage compartment behind left rear luggage compartment trim.

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.

- Remove left rear luggage compartment trim
- If necessary, remove CD changer and changer mounting







- Disconnect electrical connection -1-, remove screws -arrows- and remove control module -2-.

Installing
Install in reverse order of removal.
- After installation, check function of headlights.
- Code control module and bring headlight into basic setting.
See VAS 5051 Vehicle Diagnostic Testing and Information System or VAS 5052 Vehicle Diagnostic and Service System in mode "Guided Fault Finding".
pro multis · About Operation CHARM