DTC Memory, Erasing

Erase DTC Memory

NOTE: The vehicle V.A. G 1552 System tester can be used instead of the V.A. G 1551 scan tool, however a print-out is not possible.

- Connecting scan tool. Scan Tool Connecting
- Initiating On Board Diagnostic (OBD). On Board Diagnostic (OBD) For Convenience System, Initiating

Prerequisites:
- DTCs are corrected
- Functional check has been carried out
- DTC memory checked again

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- (the function "Erase DTC memory" is entered with 05).

Indicated on display:

Rapid data transfer Q
05 Erase DTC memory

- Confirm entry with the -Q- button.

Indicated on display:

Rapid data transfer ->
DTC memory is erased!

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- If this appears in the display, the test sequence is faulty.
- Adhere strictly to test sequence; first of all check DTC memory, then erase memory.

- Press buttons -0- and -6- to end the output.

Indicated on display:

Rapid data transfer Q
06 End output

- Confirm entry with the -Q- button.

Indicated on display:

Rapid data transfer HELP
Enter address word XX

- Switch off ignition.
- Disconnect connector to V.A.G 1551 scan tool.