Overview of Work Procedure For Measuring Vehicle

Overview of work procedure for measuring vehicle

The following work sequence must be adhered to!
1 - Check front axle camber and adjust if necessary
2 - Check rear axle camber.
^ Vehicles with front wheel drive: Camber is not adjustable.
^ Vehicles with all-wheel drive.

3 - Check rear axle toe and adjust if necessary.

Vehicles with front wheel drive
The rear axle toe is not adjustable.

Vehicles with all-wheel drive
Toe is adjustable.

4 - Check front axle toe angle and adjust if necessary.
5 - Check which suspension is installed in vehicle. This information is found on the vehicle data sticker.