Requirements

Requirements:
^ Check suspension, wheel bearing, steering and steering linkage for excessive play and damage.
^ Tire tread depth difference of no more than 2 mm on an axle.
^ Tires inflated to correct pressure
^ Vehicle unladen

Fuel tank must be full

Spare wheel and vehicle tools are stowed at correct installation locations.

The fluid reservoir for the windshield/headlight washer system must be full.
^ Make sure that the sliding plates and turn tables (alignment equipment) are not touching the end stop when checking wheel alignment.

CAUTION: The test equipment must be properly adjusted and attached to the vehicle; observe manufacturers operating instructions.

Adhere to manufacturer of your vehicle alignment equipment for training as required.

Vehicle alignment platforms and vehicle alignment units/vehicle alignment computers can lose their calibration over a period of time.

Vehicle alignment platforms and vehicle alignment units/vehicle alignment computers should be checked and if necessary adjusted within the framework of an inspection/maintenance at least once a year!
- Treat these highly sensitive units carefully and conscientiously!