DTC Memory, Checking

Check DTC Memory

- Connecting scan tool. Scan Tool Connecting
- Initiating On Board Diagnostic (OBD). Initial Inspection and Diagnostic Overview
- Switch on printer with Print button (warning lamp in button lights up).
- Press buttons -0- and -2- (the function "Check DTC memory" is entered with 02).

Indicated on display:

Rapid data transfer Q
02 - Check DTC memory

- Press "Print" button.
- Confirm entry with the -Q- button.

The number of stored malfunctions appears in the display.

X DTCs recognized!

The stored malfunctions are displayed and printed out one after the other.

- Enter DTC table at malfunction printed out and repair.

If "No DTC recognized" is displayed, the program will return to the initial position after pressing the -> button.

No DTC recognized! ->

Indicated on display:

Rapid data transfer HELP
Select function XX

If something else is displayed:
- End output (function 06). End Output
- Switch off ignition and separate diagnostic connections.

NOTE: If a DTC is recognized:
1 Repair malfunction
2. Erase DTC memory (function 05).
3. Check DTC memory again (function 02).