Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2005 >> Passat Wagon 4Motion (3B6) V6-2.8L (ATQ) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Multi-Function Transmission Range (TR) Switch -F125-, Replacing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Multi-Function Transmission Range (TR) Switch -F125-, Replacing



Multi-Function Transmission Range (TR) Switch -F125-, Replacing

Recommended special tools and equipment







- V.A.G 1331 torque wrench (5 to 50 Nm)

Requirements
- Selector lever must be in -P- position.
- Parking brake must be engaged or else daylight driving lights will be switched on.
- Ignition switched off.

Removing







- Disconnect harness connector -2- to Multi-Function Transmission Range (TR) Switch -F125- (-1-).
Observe safety precautions.
- Remove left transmission supports.
- Unscrew mounting bolts and remove Multi-Function Transmission Range (TR) Switch -F125- (-1-) from shift rod.

Installing

NOTE:
- For the sake of illustration, work procedure is shown with transmission removed.
- Set Multi-Function Transmission Range (TR) Switch -F125- centered on shift rod. Risk of damage at switch terminals.







- Connect Multi-Function Transmission Range (TR) Switch -F125- (-3-) to shift rod -1-.
- Flat part at splines in Multi-Function Transmission Range (TR) Switch -3- must align with flat part of shift rod -1-.
- Rotate multi-function switch -3- until the alignment bore -4- can be fitted on the alignment pin -2- at transmission housing.
- Tighten mounting bolts for Multi-Function Transmission Range (TR) Switch.
Tightening torque: 8 Nm
Rest of installation is performed in the reverse order of removal.
- Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data.
- Generate readiness code.
pro multis · About Operation CHARM