Anti-Theft Alarm System Ultrasound Sensor (G209), Left Rear Side of Roof, through MY 09

Anti-Theft Alarm System Ultrasound Sensor (G209), Left Rear Side of Roof, through MY 09

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

From model year 2007, the Vehicle Inclination Sensor (G384) and anti-theft alarm system ultrasound sensor (G209) are installed in one unit on the left rear side of the roof.


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Unclip the anti-theft alarm system ultrasound sensor - arrow - using (VAS 3409).






• The clip - 1 - that holds the anti-theft alarm system ultrasound sensor has three prongs. To loosen the anti-theft alarm system ultrasound sensor, the three prongs must be pressed. Otherwise, the sensor will not come out.

- Remove the anti-theft alarm system ultrasound sensor.






- Disconnect the connector - 1 - from the anti-theft alarm system ultrasound sensor.

Installation

Install in reverse order of removal.