Diagram 606/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Left and Right Seat Belt Switch, Left and Right Rear Side Airbag Crash Sensor, Airbag Control Module, Driver's and Passenger's Seat Belt Tensioner Igniter 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Left Seat Belt Switch

E25 - Right Seat Belt Switch

G256 - Left Rear Side Airbag Crash Sensor Airbag Crash Sensors

G257 - Right Rear Side Airbag Crash Sensor Airbag Crash Sensors

J234 - Airbag Control Module Airbag Control Module -J234-

J519 - Vehicle Electrical System Control Module Vehicle Electrical System Control Module -J519-

N153 - Driver's Safety Belt Tensioner Igniter 1 Locations

N154 - Front Passenger's Safety Belt Tensioner Igniter 1 Locations

T2j - 2- Pin Connector, yellow, in front footwell, left

T2k - 2- Pin Connector, yellow, in front footwell, right

T2aa - 2- Pin Connector, yellow, below driver's seat

T2ab - 2- Pin Connector, yellow, below front passenger's seat

T3o - 3- Pin Connector

T3p - 3- Pin Connector

T75 - 75-Pin Connector, at J234

(109) - Ground Connection, in airbag wiring harness

Previous Diagram 606/5 (Tracks 43-56)

Next Diagram 606/7 (Tracks 71-84)