Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2007 >> Eos (1F7) V6-3.2L (BUB) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Service and Repair >> ABS Mark 60, ABS, EDL, ASR and ESP, through Calendar Week 22.2008 >> Control Module and Hydraulic Unit, Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module and Hydraulic Unit, Installing







Control Module and Hydraulic Unit, Installing

• Do not remove sealing plugs at new hydraulic unit until the corresponding brake line is about to be installed.

• If the sealing plugs are removed too early, brake fluid can escape. If this occurs, unit may not be sufficiently filled or adequately bled.

- Installation is performed in the reverse order of removal.

- Remove brake pedal actuator (V.A.G 1869/2).

- Bleed brake system. Refer to => [ Brake System, Bleeding ] Brake System, Bleeding

- Enter radio code.

- Code the ABS control module (J104) with the in "Guided Fault Finding".

A steering angle sensor (G85) , transverse acceleration sensor (G200) and brake pressure sensor 1 (G201) basic setting must be done.






pro multis · About Operation CHARM