Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2007 >> Eos (1F7) V6-3.2L (BUB) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Lighting and Horns >> Headlamp Control Module >> Service and Repair >> High-Intensity Gas Discharge Lamp Control Module, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

High-Intensity Gas Discharge Lamp Control Module, Removing and Installing



High-intensity Gas Discharge Lamp Control Module, Removing And Installing

NOTE:
- Left High-intensity Gas Discharge Lamp Control Module J343 and Right High Intensity Gas Discharge Lamp Control Module J344 is not capable of On Board Diagnostic (OBD).
- Illustrations depict replacement of High-intensity Gas Discharge Lamp Control Module at right headlamp.
- Replacement of Left High-intensity Gas Discharge Lamp Control Module J343 and of Right High-intensity Gas Discharge Lamp Control Module J344 is performed analogously.

- Check headlamp for function.
- Check and adjust headlamp aim if necessary.

Removing:

NOTE: Observe safety notes

- Remove headlamp.







- Remove mounting bolts -3- and remove gas discharge lamp control module -2- from headlamp connector position -1-.

Installing:
Install in reverse order of removal, noting the following:

NOTE: Make sure seals have proper seating when installing High-intensity Gas Discharge Lamp Control Module. Water intrusion will damage headlamp.
pro multis · About Operation CHARM