Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission to Engine Tightening Specifications

Transmission to Engine Tightening Specifications

1 - Driving Direction

- Drive Plate to Converter

• 60 Nm

• Quantity: 6, remove and install using (V/175).

- M12 Bolts

• 80 Nm

• 65 Nm, if using (T10179).

- M10 Bolts

• 40 Nm

• The bolts are located in the lower flange

- Two alignment sleeves inside the engine - arrows -

- Make sure the bracket does not touch the ATF cooler.

Nuts - 8 Nm