General Specifications

Cylinder Head Bolts
Replace cylinder head bolts





First pass hand-tight
Second pass 40 Nm
Third pass 90° (1/4 turn) additional turn
Final pass 90° (1/4 turn) additional turn

Camshaft Bearing Cap Bolts





First pass: Gently tighten bolts from inside working toward outside in several stages
Second pass: 8 Nm plus an additional 90° (1/4 turn)

Camshaft sprocket bolt 50 Nm plus an additional 180° (1/2 turn)

Camshaft adjuster bolt 20 Nm plus an additional 45° (1/8 turn)

Cylinder Head Distortion





Max. permissible distortion 0.1 mm