ABS Mark 60, ABS, EDL, ASR and ESP, through Calendar Week 22.2008, Control Module, Removing from Hydraulic Unit

Control Module, Removing from Hydraulic Unit

• Separation from control module and hydraulic unit is not possible on vehicles with hydraulic brake booster or hill assist.

- Set hydraulic unit with control module downward onto a clean, level surface.

- Remove the inside E5 Torx bolts - arrows - from the hydraulic pump.







The hydraulic pump must not be separated from the hydraulic unit.

Avoid build-up of static electricity!

- For this reason, secure hydraulic pump to hydraulic unit using red retainer - 1 - from replacement part set and two sealing plugs - 2 -.






- Carefully disconnect hydraulic unit with hydraulic pump upward at interface - 1 - from control module.






When removing control module, be sure that the valve domes of the hydraulic unit do not jam or get bent in the magnetic coils of the control module.






Item - 2 - pump motor adapter.

- Cover control module magnetic coils with a lint free cloth.

After separating the control module and hydraulic unit, use transport protection for valve body.