Left HID Headlamp Range Control Module

Left HID Headlamp Range Control Module

CAUTION:
- HIGH VOLTAGE.
- Always disconnect negative (-) battery terminal prior to servicing any parts of the HID lamp system marked with the yellow "HIGH VOLTAGE." symbol.
- After disconnecting battery, briefly turn headlamps on and off in order discharge any residual voltage.

The (master) control module is located in the left front wheel housing.

Removing
- Remove left front wheel housing liner.







- Remove nuts - 1 - for control module.
- Disconnect electrical connection - 2 -.

Installing
Install in reverse order of removal.
- Check headlamp function.
- Code control module (function 07) using On Board Diagnostic program.
- Perform headlamp basic setting (function 04) using On Board Diagnostic program.