Output Diagnostic Test Mode

Output Diagnostic Test Mode

NOTE: It depends on the vehicle equipment whether the components and functions listed below can be checked.

The following components and functions can be checked via output Diagnostic Test Mode (DTM) of Comfort System Central Control Module J393 :
- Left Rear Entry Lamp W33
- Left Rear Central Locking Lock Unit F222 (central locking of left rear door is activated)
- Right Rear Entry Lamp W34
- Right Rear Central Locking Lock Unit F223 (central locking of right rear door is activated)
- Tank flap activation (tank flap is opened)
- Rear lid activation (rear lid is opened)
- Vehicle Inclination Sensor Indicator Lamp K188 (LED) in Interior Monitoring Deactivation Switch E267
- Interior Monitoring -Off- Indicator Lamp K162 (LED) in Deactivate Vehicle Inclination Sensor Button E360
- Alarm Horn H12

- Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
- In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Body repair procedures
- 01 - On Board Diagnostic (OBD) capable systems
- Comfort system
- Functions - central control module for comfort system
- Comfort System Central Control Module -J393-, output Diagnostic Test Mode (DTM)