Procedures

Oxygen Sensor Unit Protective Pipes

NOTE:
- In addition to using the part number, the protective pipe can also be used for identification.
- Do not repair the oxygen sensor wires. Repairing may result in malfunctions.
- Use the faulty sensor as a guide for installing all of the accompanying attachments, cable ties or marking bands.
- If necessary, identify the oxygen sensor by the protective pipe.

Version D1 - 6 openings, 3.5 mm each







Only used with the 4-pin oxygen sensor

Version D2, 6 openings, 2 mm each







Used with 4-pin and 6-pin universal oxygen sensors.

Version D4, 12 openings,1.4 mm each







Used with 4-pin and 6-pin universal oxygen sensors.