Procedures

All Wheel Drive Control Module Assembly Overview





1- All wheel drive control module J492
2- Bolt, 6 Nm
3- Cover plate
^ With vulcanized gasket
^ Always renew
4- Haldex clutch control valve N373
^ Is calibrated with all wheel drive control module J492
5- Oil seal
^ Make sure the centering lip fits correctly in the groove
^ Coat with high performance Haldex clutch oil and insert
^ Always replace
6- Oil seal
^ Old version
7- Oil seal
^ Diameter 12 mm
^ Coat with high performance Haldex clutch oil and insert
^ Always replace
8- Oil seal
^ Diameter 11 mm
^ Coat with high performance Haldex clutch oil and insert
^ Always replace
9- Oil seal
^ Coat with high performance Haldex clutch oil and insert
^ Always replace
10- Oil pressure/temperature sensor G437
11- Plate spring





Plate Spring Location
Convex side with marking - arrow - faces toward pressure sensor - 1 -.