Windshield Wiper System

Windshield Aero Wiper Blades

Removing

NOTE:
- Right and left wiper blades may not be interchanged during installation.
- Aero-wipers are very flexible. Grasp wiper blades only in area of wiper blade mount to lift them off front windshield.
- To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition.

- Move wiper arms into "service/winter position" by moving windshield wiper lever into "one-touch wiping" position within 10 seconds after switching off ignition.
- Fold up wiper arm.







- Turn wiper blade - 1 - on wiper arm until it reaches stop - arrow A -.
- Pull off wiper blade - 1 - from wiper arm axle - arrow B -.

Installing
- Slide wiper blade onto axle of wiper arm.
- Turn wiper blade on wiper arm axle until it reaches stop.
- Carefully fold wiper arm back onto windshield.