Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2009 >> CC 4Motion (357) V6-3.6L (BLV) >> Repair and Diagnosis >> Body and Frame >> Access Cover >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Access Cover: Service and Repair







Upper Engine Cover, Removing and Installing

CAUTION!
• To install engine cover or to engage at mounting points, be sure not to strike the engine cover with a fist or tool, danger of damage.

2.0L TFSI

Special tools, testers and auxiliary items required

• Spring type clip pliers (VAS 6499)





- Release clip - 3 - at air intake connections with spring-type clip pliers (VAS 6499) and slide back.





- Disconnect connector - 1 - from Mass Air Flow (MAF) sensor, and set connector aside.

- Open both clamps - 2 -.





- Remove engine cover upward. Note dashed fastening points shown in illustration.

Installation is the reverse of removal.

2.0L TSI

Removing

- Disengage engine cover at the retaining points - arrows - and remove engine cover upward.





Installing

- Set engine cover onto retaining points - arrows - and press it on, until it is engages.
pro multis · About Operation CHARM