Bench Seat Cover and Upholstery

Rear Cover and Cushion

Bench Seat Cover and Upholstery

Removal





- Remove the rear bench seat.

- Detach the piping -=> [ (Item 2) Molding ] Rear Cover and Cushion (Overviews)- of the cover -=> [ (Item 1) Cover ] Rear Cover and Cushion (Overviews)- from the wire frame-=> [ (Item 8) Wire Frame ] Rear Cover and Cushion (Overviews)-.

- Cut the upholstery clips -=> [ (Item 6) Cushion Clamp ] Rear Cover and Cushion (Overviews)- and remove the cover -=> [ (Item 1) Cover ] Rear Cover and Cushion (Overviews)- with the guides -=> [ (Item 4) Guide ] Rear Cover and Cushion (Overviews)- from the cushion -=> [ (Item 7) Cushion ] Rear Cover and Cushion (Overviews)-.

Installation

To install, perform the steps used in removal in reverse order.

Use new cushion clamps when reinstalling.

Removing the headrest guides (one-piece bench seat)

After installing, headrest guides are secured to cover and can only be removed after removing/loosening cover from cushion.

- Release both catches on lower section of guide - 3 - using screwdriver and pull out upper section of guide - 1 -.





Installing the headrest guides (one-piece bench seat)

- Insert lower section of guide - 3 - into cushion.

- Install cover - 2 - and insert upper section of guide - 1 - until it engages.

Headrest guides, removing and installing (two pieces seatbench)

After installing, headrest guides are secured to cover and can only be removed after removing/loosening cover from cushion.

- Press headrest guide catches - 1 - together and remove retaining ring - 2 -.





- When installing, press headrest guide - 1 - and retaining ring - 2 - together over cover - 3 -.