Oil Pump Drive Chain Assembly Overview

Oil Pump Drive Chain Assembly Overview





1 Cylinder Block

2 Oil Pump Drive Chain Guide Rail

• Secured to the upper oil pan.

• Oil before installing the pin.

3 Oil Pump Drive Chain Tensioner

• Secure with locking pin (T10115).

4 Bolt, 10 Nm

5 Oil Pump Sprocket

• Removal and Installation, refer to one of the following:

• => [ Oil Pump, through MY 2007 ] Oil Pump, Through MY 2007.

• => [ Oil Pump, from MY 2008 ] Oil Pump, From MY 2008.

6 Oil Pump Drive Chain

• Removing:

- Remove the engine.

- Remove the control housing cover.

- Remove the timing chain.

- Remove the chain tensioner - item 3 -.

- Mark direction of travel.

• Note when installing:

- Install in the original direction of rotation.

- Chain must lie correctly in the tensioning and guide rails.

- Adjust the valve timing. Refer to => [ Valve Timing, Adjusting ] Adjustments.

7 Bolt, 20 Nm + 90° (1/4) additional turn

• Replace

8 Oil Pump Drive Chain Guide Rail

• Oil before installing the pin

9 Bolt, 10 Nm

10 Axial Bearing Disc

• Engages in the groove in the double wheel sprocket - item 12 -.

11 Bolt, 60 Nm + 90° (1/4) additional turn

• Replace

12 Double Wheel Sprocket

• Oil the journal before installing.

• Oil groove for axial bearing disc - item 10 -.

13 Double Wheel Sprocket Journal

14 Tensioning Rail Pin, 40 Nm

• For the timing chain tensioner.