Function 07 - Coding Instrument Cluster

Function 07 - Coding Instrument Cluster

Use this function to code the control module with indicator unit in instrument cluster control module (J285) with the following information:

• Available equipment

• Market version

• Number of cylinders

• Code for distance impulse number ("K" - number)

- Press buttons 0 and 7 to select function 07 "Code Control Module".

- Press Q button to confirm input.

Indicated on display

Code Control Module
Input code number XXXXX (0-32000)

- Confirm vehicle applicable market, model and equipment particulars, determine and enter code number from code table below.

Example:





Code Table





* If more than one type of optional equipment is to be entered, then the code numbers must be added together.

Example

Brake pad wear indicator and seat belt warning active:

Available equipment coding 01 + 02 = 03

Indicated on display (example only)

Code Control Module Q
Input code number 03241 (0-32000)

- Press Q button to confirm input.

Indicated on display (example only)

1C0919951E KOMBIINSTR. M73 V24 ->
Coding 03241 WSC 00000

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

End output:

- Press buttons 0 and 6 to select " End Output" function 06.

Indicated on display

Rapid data transfer Q
06 - End output

- Press Q button to confirm input.

Indicated on display

Rapid data transfer HELP
Insert address word XX

The scan tool returns to the start of the program sequence.