Windshield Washer System

Windshield Washer System

=> [ Windshield Washer System Assembly Overview ]

=> [ Windshield Washer System Spray Nozzles, Correcting Spray Field ]

Windshield Washer System Assembly Overview





1 Securing Strip

2 Heated Spray Nozzles Electrical Wire

3 Hose

4 Cap

• With connector for heated spray nozzles

5 Spray Nozzles

• Removing, refer to => [ Windshield Washer System Spray Nozzles ] Windshield Washer System

6 Window Washer System Tank

• Remove the right front wheel housing liner

7 Windshield Washer Pump (V5)

• Pull upward out of the rubber grommet

8 Connector

9 Screw

• 5 Nm

10 Windshield Washer System Reservoir Connection

11 Through Piece

12 Heated Spray Nozzles Connector

13 Hose Clip

Windshield Washer System Spray Nozzles, Correcting Spray Field

• The spray nozzles must not be cleaned from the opposite direction of the flow.

The spray nozzles are pre-positioned. However, minor adjustments may be made to the spray height.

The direction of spray must be corrected if both spray fields are not at the same height - A - and - B -.





- To correct the spray field - 2 - on the windshield turn the eccentric - 1 - on the spray nozzle in - direction of arrow - with a screwdriver.