Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turn Signal Switch







Turn Signal Switch


Follow the specified sequence when removing and installing steering column switch components. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

The "turn signal switch" consists of the Turn signal switch (E2) , Headlamp dimmer/flasher switch (E4) and, depending on the equipment, (CCS) Cruise control switch (E45).

For reasons of clarity, steering column switches with Cruise control switch (E45) are depicted as removed in the illustration.

Removing

- Release retaining clips - arrows - using a 1.0 mm feeler gauge - 1 - and remove the "turn signal switch" toward the rear of the vehicle.






Installing

Install in reverse order of removal. Note the following:

The "turn signal switch" must engage audibly.