Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2010 >> CC (357) V6-3.6L (BLV) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Steering and Suspension >> Relays and Modules - Steering >> Steering Column Control Module >> Service and Repair >> Steering Column Switch Module >> Steering Angle Sensor G85, through 10.09
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Angle Sensor G85, through 10.09







Steering Angle Sensor G85, through 10.09

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Removal and Replacement.

Remove the following components in order:

• Danger of the airbag deploying!

• The airbag could deploy if the unit is mishandled.

• Follow all Safety Precautions when working on an airbag.

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the steering column electronics control module (J527). Refer to => [ Steering Column Electronics Control Module J527, through 10.09 ] Steering Column Electronics Control Module J527, through 10.09.

- Remove Airbag Spiral Spring/Return Spring With Slip Ring (F138). Refer to => [ Airbag Spiral Spring/Return Spring With Slip Ring F138, through 10.09 ] Airbag Spiral Spring/Return Spring With Slip Ring F138, through 10.09.

- Disengage catches - arrows - and pull off segment sensor for steering angle sensor - 1 - toward rear from steering column switch unit.






Installing

Install in reverse order of removal.

pro multis · About Operation CHARM