Power Mirror Switch: Service and Repair

Mirror Adjustment Switch E43

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

The following components are integrated in Mirror Adjustment Switch (depending on equipment):

• Mirror Selector Switch (E48)

• Outside Mirror Heating Switch (E231)

• Mirror Folding Switch (E263)

• Mirror Adjustment Switch Illumination (L78)

• Driver exterior mirror horizontal position sensor (G514)

• Driver exterior mirror vertical position sensor (G515)

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Carefully pry the grip panel - 1 - up at the retaining tab in the - direction of the arrow - with the (3409).






- Pull the grip handle forward and remove it from the door trim. Be careful of the connected wires.

- Release and disconnect the connectors - arrows - and remove the grip panel.






- Disengage the retaining tab - arrow - and remove the mirror adjustment switch - 1 - from the grip panel.






Installing

Install in reverse order of removal.