Level Control System Sensor, Checking

Level Control System Sensor, Checking

Special tools, testers and auxiliary items required

• Vehicle Diagnostic, Testing and Information System (VAS 5051A)

The Vehicle Level Sensors transmit vehicle level in the form of a signal to the Headlamp Range Control Module (J431).

In the following, it will be checked whether the Left rear level control system sensor (G76) and Left front level control system sensor (G78) send usable signals to the Headlamp range control module (J431).

In the following cases, no DTC entry is stored in Headlamp Range Control Module (J431) :

• when vehicle level sensors are not installed as specified in the Repair Information

• when vehicle level sensors are damaged mechanically

• in vehicles with a modified axle geometry (for instance, lowered vehicles).

• If the values of the level control system sensors are outside the tolerance range, a basic setting of the headlamps cannot be performed.

- Connect (VAS 5051A).

- In (VAS 5051A) , select operating mode "Guided Fault Finding".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Automatic Headlamp Range Control

• Functions of automatic headlamp range control

• Level Control System Sensor, Checking