Access/Start Authorization Control Module (J518), Coding

Access/Start Authorization Control Module (J518), Coding

Special tools, testers and auxiliary items required

• Vehicle Diagnostic Tester

The access/start authorization system must be coded after the access/start authorization control module has been replaced.

- Connect the Vehicle Diagnostic Tester. Refer to => [ Vehicle Diagnosis, Testing and Information Systems ] Vehicle Diagnosis, Testing and Information Systems.

- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Body repair procedures

• Access/start authorization

• Functions: Access/start authorization

• Access/Start Authorization Control Module, Coding