Battery Monitoring Control Module (J367), Replace, Removing and Installing

Battery Monitoring Control Module (J367), Replace, Removing and Installing

The procedure for "replacing the battery monitoring control module" includes the following steps:

• If a new battery monitoring control module (J367) is installed in the vehicle, then the battery monitoring control module (J367) must be coded.

• Then the battery monitoring control module (J367) must be adapted.

The procedure to "replace the battery monitoring control module" can only be performed using the Vehicle diagnostic tester in the "Guided Fault Finding" function.

Procedure

- Vehicle diagnostic tester Connecting.

- Select Guided Fault Finding.

- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• 61 - Battery regulation

• Battery regulation functions

• Replace control module

After the "replace the battery monitoring control module" procedure occurs, the "starting after replacing" procedure must be performed.

Procedure

- Vehicle diagnostic tester Connecting.

- Select Guided Fault Finding.

- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• 61 - Battery regulation

• Battery regulation functions

• Starting after replacing