Exhaust Temperature Sensor: Service and Repair

Clamps and Exhaust Gas Temperature Sensor, Installed Position

Clamp Installed Position between the Particulate Filter and Turbocharger





- Install the new clamp so the bolt faces down and the - +/- 10° - angle is maintained.

Clamp Installed Position between the Particulate Filter and Exhaust Gas Recirculation (EGR) Filter





- Install the new clamp so the bolt faces down and the - +/- 10° - angle is maintained.

Exhaust Gas Temperature Sensor Installed Position





- Install the exhaust gas temperature sensor so the angles are maintained:

• Exhaust gas temperature sensor 3 (- 1 -): Angle - 23° -.

• Exhaust gas temperature sensor 2 (- 2 -): Angle - 30° -.

Installed Position: Clamp Between the Particulate Filter and NOx Reduction Catalytic Converter





- Install the new clamp maintaining the - 45° +/- 10° - angle.