Cowl: Service and Repair

Plenum Chamber Bulkhead Overview






1 Plenum Chamber Bulkhead

• Removing:

- Remove plenum chamber cover, refer to => [ Plenum Chamber Cover ] Plenum Chamber Cover.

- Remove the screw - 5 - and the nut - 2 -.

- Remove the plenum chamber bulkhead up out of the plenum chamber - 4 -.

2 Nut

• Tightening specification: 8 Nm

• Quantity: 1

3 Seal

• When installing the plenum chamber bulkhead, make sure seal is seated correctly.

4 Plenum Chamber

5 Bolt

• Tightening specification: 8 Nm

• Quantity: 1