Electronic Stabilization Program Components Overview

Electronic Stabilization Program Components Overview

The transverse acceleration sensor (G200) , the rotation rate sensor (G202) and the longitudinal acceleration sensor (G251) (depending on the vehicle equipment level) on the ABS-Mark 60 EC are installed inside the ABS control module (J104).

It is not possible to replace them individually.

- ABS control module, removing and installing, refer to => [ ABS Control Module (J104) and ABS Hydraulic Unit (N55) ] ABS Control Module (J104) and ABS Hydraulic Unit (N55).

Steering angle sensor (G85) , removing and installing, refer to=> [ Steering Angle Sensor (G85) ] Service and Repair.






1 Bolt

• 30 Nm + 90°

• Always replace if removed.

2 Steering Wheel

3 Bolt

• 1.5 Nm

• Quantity: 3

4 Steering Angle Sensor (G85)

• Removing and installing, refer to => [ Steering Angle Sensor (G85) ] Service and Repair.

5 Steering Column